TCM FX® Ground plate

available for
TCM FX® WI-Sot
TCM FX® E-Shot
TCM FX® CO2 Jet
TCM FX® CO2 LED

The TCM FX® groundplate is used for the E-Shot, WI-Shot, CO2 Jet and CO2 LED.
Four E-Shots or two CO2 jets can be attached to it.
Size: 30x30 cm, heigth: 5 mm, weight: 3.3 kg

TCM FX® Ground plate XL

available for
TCM FX® WI-Sot
TCM FX® E-Shot
TCM FX® CO2 Jet
TCM FX® CO2 LED
TCM FX® Turbo Jet

This product is designed for the Turbo Jet, but can also be used for other TCM machines such as the Wi-Shot, E-shot, CO2 Jet and the CO2 LED.
Size: 45x45 cm, height: 5 mm, weight: 7.2 kg

TCM FX® CO2 Hose 3/8
Available in 5, 10 and 15 meters

available for
TCM FX® CO2 Jet
TCM FX® CO2 Gun
TCM FX® CO2 LED
TCM FX® Booster

The high pressure hoses are specially made to transport liquid CO2 gas from the gas bottle to the machine. Use them in combination with the CO2 Jet, CO2 Gun, CO2 LED and TCM FX® Booster.
The hoses have a working pressure of 175 bar and are lightweight.
Lenght: 5, 10 and 15 m

TCM FX® CO2 Hose 3/4
Available in 5, 10 and 15 meters

available for
TCM FX® Turbo Jet

These hoses are only used in combination with the Turbo Jet. Like the 3/8 high pressure hoses, these 3/4 high pressure hoses are specially made to transport liquid CO2 gas from the gas bottle to the machine. The hoses have a working pressure of 175 bar and are lightweight.
Lenght: 5, 10 and 15 m

TCM FX® Ground plate

available for
TCM FX® WI-Sot
TCM FX® E-Shot
TCM FX® CO2 Jet
TCM FX® CO2 LED

The TCM FX® groundplate is used for the E-Shot, WI-Shot, CO2 Jet and CO2 LED .
Four E-Shots or two CO2 jets can be attached to it.
Size: 30x30 cm, heigth: 5 mm, weight: 3.3 kg

TCM FX® Ground plate XL

available for
TCM FX® WI-Sot
TCM FX® E-Shot
TCM FX® CO2 Jet
TCM FX® CO2 LED
TCM FX® Turbo Jet

This product is designed for the Turbo Jet, but can also be used for other TCM machines such as the Wi-Shot, E-shot, CO2 Jet and the CO2 LED.
Size: 45x45 cm, height: 5 mm, weight: 7.2 kg

TCM FX® CO2 Hose 3/8
Available in 5, 10 and 15 meters

available for
TCM FX® CO2 Jet
TCM FX® CO2 Gun
TCM FX® CO2 LED
TCM FX® Booster

The high pressure hoses are specially made to transport liquid CO2 gas from the gas bottle to the machine. Use them in combination with the CO2 Jet, CO2 Gun, CO2 LED and TCM FX® Booster.
The hoses have a working pressure of 175 bar and are lightweight.
Lenght: 5, 10 and 15 m

TCM FX® CO2 Hose 3/4
Available in 5, 10 and 15 meters

available for
TCM FX® Turbo Jet

These hoses are only used in combination with the Turbo Jet. Like the 3/8 high pressure hoses, these 3/4 high pressure hoses are specially made to transport liquid CO2 gas from the gas bottle to the machine. The hoses have a working pressure of 175 bar and are lightweight.
Lenght: 5, 10 and 15 m

TCM FX® Distribution block

details
Available in 3/4 and 3/8 version

This block is specially designed for the distribution of CO2 gas from the gas bottle to the Turbo jet. To create the right effect, the Turbo jet needs to be connected to four CO2 bottles.
You can also use this distribution block for the regular CO2 jet. Then the coupling pieces need to be changed to the smaller 3/8 coupling pieces.
Using the distribution block in this specific way you are able to increase the amount of CO2 sprayed in the air. A normal bottle lasts for about 90 seconds but with this distribution block you can increase the spray time to 360 seconds.
Size: 27.5 x 5 x 11 cm, weight: 4 kg.

TCM FX® Bottle connector

details
Straight and available in 90°.

To connect CO2 gas bottle to a CO2 machine you will need this coupling piece.

TCM FX® CO2 Combiner

details
2 bottles, 1 device

Use this combiner when you want to connect two CO2 bottles to one CO2 Jet or two bottles to one CO2 gun. This item is used if you want to spray more than 90 sec CO2.

TCM FX® CO2 Splitter

details
1 bottle, 2 devices

Use this combiner (3/8 coupling) when you want to connect one CO2 gas bottle to two CO2 Jets or one bottle to two CO2 guns. This item is used if you want to spray more than 90 sec CO2.
It is used when you want to spray low amounts of CO2. A disadvantage is that the CO2 gas bottles get empty very fast.

TCM FX® Distribution block

details
Available in 3/4 and 3/8 version

This block is specially designed for the distribution of CO2 gas from the gas bottle to the Turbo jet. To create the right effect, the Turbo jet needs to be connected to four CO2 bottles.
You can also use this distribution block for the regular CO2 jet. Then the coupling pieces need to be changed to the smaller 3/8 coupling pieces.
Using the distribution block in this specific way you are able to increase the amount of CO2 sprayed in the air. A normal bottle lasts for about 90 seconds but with this distribution block you can increase the spray time to 360 seconds.
Size: 27.5 x 5 x 11 cm, weight: 4 kg.

TCM FX® Bottle connector

details
Straight and available in 90°

To connect CO2 gas bottle to a CO2 machine you will need this coupling piece.

TCM FX® CO2 Combiner

details
2 bottles, 1 device

Use this combiner when you want to connect two CO2 bottles to one CO2 Jet or two bottles to one CO2 gun. This item is used if you want to spray more than 90 sec CO2.

TCM FX® CO2 Splitter

details
1 bottle, 2 devices

Use this combiner (3/8 coupling) when you want to connect one CO2 gas bottle to two CO2 Jets or one bottle to two CO2 guns. This item is used if you want to spray more than 90 sec CO2.
It is used when you want to spray low amounts of CO2. A disadvantage is that the CO2 gas bottles get empty very fast.

TCM FX® CO2 Manual release valve

details

This valve is primarily designed for the Confetti Booster.
But you can also use it for other applications, such as the venting of the CO2 hoses.

TCM FX® CO2 Quick connector

details
Male or female.

The 3/8 connectors are used for older systems that do not have shortcuts.
The connectors ease connecting hoses to the machines and you will not be affected by any leakages.

TCM FX® CO2 Manual release valve

details

This valve is primarily designed for the Confetti Booster.
But you can also use it for other applications, such as the venting of the CO2 hoses.

TCM FX® CO2 Quick connector

details
Male or female.

The 3/8 connectors are used for older systems that do not have shortcuts.
The connectors ease connecting hoses to the machines and you will not be affected by any leakages.

15 + 4 =

You want to know everything there is about our confetti, smoke and fire makers?

If you want to know more about The Confettimaker or our products and services, please give us a call. You can also choose to fill in the form. We will contact you as soon as possible.

Coriet van Alphen-Roosstraat 30   |   3088 GT  Rotterdam   |   The Netherlands   |   info@theconfettimaker.com   |  tel.: +31 (0)10 - 254 11 11

ontwerp: 2DSign | huisstijl professionals